Yes. There is a minimum 2 container order with all Special Orders. All custom orders will be reviewed on a case by case basis.
Frequently Asked Questions
-
We intend to have the product available near the end 2nd Quarter/ beginning of 3rd Quarter of 2011
-
When the product is launched we will have 4 great SKUs to select from.
-
Yes, Intaglio and soon EIR. With Intaglio and EIR, the plateau’s & valleys are well pronounced across the product’s surface. Intaglio and EIR have a rustic feel with a unique 3 Dimensional visual.
-
No. Simply lift out the damaged plank or tile and replace with a new one.
-
No. Due to the unique & innovative Hot Press Method of engineering, there are no adhesives used in the manufacturing process. The layers are fused to each other, thus leaving no room for the product to delaminate.
-
No. There are large amounts of variation within the product, therefore there are no dye lots
-
No. It actually acts more like a non skid backing.
-
If the object being rolled has the proper sized castors/wheels, then FF will not move. FreeFit has a Static Load Limit of 2,000 psi, one of the highest in the industry. It is recommended that heavier objects use large castors/wheels for ease of mobility.
-
The plank & tile are non directional. They can be installed in any direction.
-
No. FF planks & tile simply lay adjacent to each other using no locking system or glue tabs around the perimeter of each plank.
-
Yes. Moisture will not affect FF, but could get trapped between the substrate & the FF floor. After sitting for a while, the moisture could eventually mold & mildew.
-
You have to acclimate for flexibility & pliability reasons. Coming from a cold warehouse, FF will be stiff & more difficult to install.
-
There is a 10 tile pattern repeat for each plank & tile.
-
You would install using a perimeter glue. Glue 1 tile or plank around the perimeter of the room using a premium LVT adhesive or double sided tape.
-
Score, snap & back cut or the use of a Guillotine or chop cutter works well.
-
Due to the glueless installation, you will not get the typical fumes from a flooring adhesive. No odors of any kind are given off when the product is cut.
-
Any type of hard surface cleaner is fine. Avoid cleaners with a wax or silicone base, as they will leave a residue behind. Water will not hurt the product
-
The product is similar to rectified vinyl. The precise milling contributes to a snug, straight water tight fit.
-
Patented Backing – suction/anti skid backing
Weight – weighs 3-4 times more than the average LVT product
Dimensional Stability – install tight to the perimeter or perimeter glue to lock in the installation


